• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 33 subscribers
  • Views 251 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LMH0346: Acquisition time and latency

Iris Metzner
Prodigy 20 points

Part Number: LMH0346

Hello,

1. An acquisition time of 15 ms is specified in the data sheet. That's long. Is this time the same in any rate select mode (auto-rate or fixed rate)?

2.Can you provide information on the latency times of the LMH0346?

Best regards

Iris 

  • 0
    TI__Guru* 93570 points

    Hi Iris,

    1). This is for auto rate selection. If it is a fixed rate then lock time is much faster - in order of 3-4ms.

    2). Latency is 1.5UI. One UI is the bit time. FOr example, at 2.97G data rate, one UI is about 337ps. So the delay is 1.5 X 337 ~ 500ps.

    Regards,Nasser