This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DP83TD510E-EVM: Connecting the SPE board to MCU

Part Number: DP83TD510E-EVM
Other Parts Discussed in Thread: TM4C129DNCPDT

Hi, I'm a student and I'm working on a Single Paire Ethernet (SPE) project.

The DP83TD510E-EVM consists of two boards connected via a Samtec as shown in the bloc diagram below.

I would like to know how to connect the SPE board directly to a MCU (TM4C1294x) .

My goal is to have a RMII between the SPE board and the MCU.