Hi team,
I have a customer design in 953/954 and found out that the ESD noise will make 954/953 disconnect.
Is there any way to reduce the ESD noise or improved the connect signal?
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi team,
I have a customer design in 953/954 and found out that the ESD noise will make 954/953 disconnect.
Is there any way to reduce the ESD noise or improved the connect signal?
Hey Len,
I suggest using an ESD diode on the channel routing to reduce ESD noise. Has this approached been attempted yet?
Thanks,
Lysny