• State Resolved
  • Locked Locked
  • Replies 3 replies
  • Subscribers 32 subscribers
  • Views 210 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPD1E01B04: Recommendation for SGI cable.

Shoo Saga
Intellectual 2011 points
Part Number: TPD1E01B04
Other Parts Discussed in Thread: LMH1227, LMH1228,

Hi support teams,

Our custmer use LMH1227(LMH1228).

If they connect a bad quality SGI cable to connector , LMH1227 was broke down. 

Thie reason might be that unexpected voltage biased to the LMH1227.

Do you have any recommendation of protection IC for SGI signal which is 12G signal line?

Is TPD01E01B04 is enough for protection?

Best regards,

Shoo

  • 0
    TI__Expert 8486 points

    Hi Shoo,

    When you say " unexpected voltage biased to the LMH1227", you are thinking that it is a transient voltage like ESD/surge, or is it more of a DC short to a higher voltage line? 

    Regards,

    Matt Smith 

  • 0 in reply to Matt Smith3
    TI__Intellectual 2011 points

    Hi Smith, 

    Thanks for prompt reply.

    I'm asking my customer now.

    however they have not find out the reason yet.

    Is there any solution for latter one?
    I will promote proper ESD or TVS diode to the customer if we have good solution.

    Thanks, Shoo

  • 0 in reply to Shoo Saga
    TI__Expert 8486 points

    Hi Shoo,

    Assuming that it is a transient event causing the failure, TPD1E01B04 is a good choice for this application. 

    Regards,

    Matt