TSB41AB2 G4

Cirtica Alex

Other Parts Discussed in Thread: TSB41AB2

I'd like to know what is the difference between TSB41AB2 G4 and TSB41AB2. Is it possible to replace TSB41AB2 G4 with TSB41AB2.

Regards

Alexei

over 14 years ago

0 DHarmon over 14 years ago

TI__Genius 16430 points

The short answer is Yes.

The longer answer is the G4 designator was used to insure RoHS supply during the transistion from non-RoHS to RoHS-only production. Now the device has entirely converted (converstion started in 2005 and was insured complete by Mar-2008).

We kept both "orderable" part numbers available so that any customer who added the G4 to the approved list could continue to order it without having to change their systems.

0 Edwin SHIROABE over 11 years ago in reply to DHarmon

Prodigy 20 points

I you can informe me i will sure about reference chip

0 Edwin SHIROABE over 11 years ago in reply to DHarmon

Prodigy 20 points

Hi there

My device is equipped with as written on the chip TI > 7AADNJWC TSB41AB2 G4 OR 64 OR G64< these last 3 acronym are not very clear on the chip , it's no longer opererate what is reference to replace it i found on the web some like TSB41AB2 or TSB41AB2PAP or TSB41AB2i please.

0 Elias Villegas M. over 11 years ago in reply to Edwin SHIROABE

TI__Guru* 76130 points

Hello,

This part only have one package option which is the "PAP", the "i" stands for "industrial grade"

So, any of them has the same pinout, it only depends on the temperature range you want, standard or industrial.

Regards.

Interface

Interface forum

TSB41AB2 G4