Please provide wash/cleaning instructions for the mentioned part numbers

Dhivya Sivakumar

Prodigy 20 points

Hello,

Hope you doing well!

I have query on the below parts.

Would water washable chemistry / Air Blower be suitable for this specific component cleaning?

i.e. Whether the component is water wash compatible.

Wash- Solvent (Non-Aqueous)

Wash – Aqueous

Hermetically Sealed?

Part number	Remarks
TL431CDBZR
TCA9555RTWR
TPS54160ADGQR
TL431AIDBZR
UCC5390ECDR
UCC28950PWR
ISO7141CCDBQR
SN74LVC1G17DBVR
REF2025AIDDCR
ISO7131CCDBQR
TXB0106PWR
LMZM33602RLRR
DCP010507DBPE4
LMC6084AIM/NOPB
TPD4E1U06DBV
UCC28951QPWRQ1
UC2902D
UCC21520QDWRQ1
UCC21520QDWQ1
TPS92612QDBVRQ1
OPA320AIDBVR
TPS389001DSET
ISO7710DR
TLV7211AIDCKR
ISO7710QDRQ1
LM2903DGKR
AMC1311DWV
TLV76050DBZ

Regards,

Dhivya Sivakumar

PCB Designer

P&RGS, MKS Instruments Inc.

90 Industrial Way

Wilmington, MA 01887

dhivya.sivakumar@mksinst.com

https://www.mksinst.com/

over 3 years ago

0 Eric Hackett over 3 years ago

TI__Guru 74302 points

Dhivya,

We have some details regarding PCB Assembly Cleaning in section 11 of this Application report:

https://www.ti.com/lit/an/snoa550h/snoa550h.pdf

And more specific package information can be found here:

https://www.ti.com/support-packaging/SMT-application-notes.html

Please let us know if you have any questions after looking at this information.

Regards,

Eric Hackett

0 Dhivya Sivakumar over 3 years ago in reply to Eric Hackett

Prodigy 20 points

Hello Team,

Clear washing details are not mentioned in the document.

Could you please provide us the specific washing method.

Thank,

Dhivya

0 Dhivya Sivakumar over 3 years ago in reply to Dhivya Sivakumar

Prodigy 20 points

Hi Team,

Could you please provide below details,

i.e. Whether the component is water wash compatible.

Wash- Solvent (Non-Aqueous)

Wash – Aqueous

Thanks,

Dhivya

0 Eric Hackett over 3 years ago in reply to Dhivya Sivakumar

TI__Guru 74302 points

Dhivya,

I'm reaching out to our quality team for any other information on this, but this isn't something we have had asked to us before. We have a clearly defined wafer cleaning process, but post-assembly we provide the moisture level sensitivity information and our devices are sealed.

Regards,

Eric Hackett

Interface

Interface forum

Please provide wash/cleaning instructions for the mentioned part numbers