DS90UB960-Q1: DS90UB960-Q1

venkateshraja p

Part Number: DS90UB960-Q1

Hi sir/madam.,

We have design for FPD link iii De-serializer board.

I need your support for DS90UB960-Q1

1. RIN0+ to Capacitor Etch length (1176 MIL)

2. Capacitor to FAKRA connector Etch length (597 MIL)

This Etch length is correct or Not. Please help us

0 Hamzeh Jaradat over 3 years ago

Hi,

Please refer to the d/s Table 8-3. The max suggested PCB trace length from the RIN Pin to the Fakra connector is 5cm.

It is also recommended to keep the capacitor as close as possible to the RIN pin.

0 venkateshraja p over 3 years ago in reply to Hamzeh Jaradat

Hi Hamzeh.,

thanks for your support.

0 Hamzeh Jaradat over 3 years ago in reply to venkateshraja p

You are welcome!

Interface forum