• State Resolved
  • Locked Locked
  • Replies 4 replies
  • Subscribers 32 subscribers
  • Views 220 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

TPIC8101EVM: No INT / CLK signals from TI GER board

TPIC8101EVM: No INT/CLK generated

Daniel Serrato
Prodigy 10 points
Part Number: TPIC8101EVM

Hello there

I have an issue with my Ti-Ger board, the INT/CLK is not generated. I saw that this issue was solved in a previous thread in the forum, re-flashing the Ti-Ger board so I'm wondering if I can get the firmware and the guide to re-flash my Ti-Ger board.

https://e2e.ti.com/support/legacy_forums/automotive/f/automotive-forum-read-only/558523/tpic8101evm-missing-the-clock-and-int-signal?tisearch=e2e-sitesearch&keymatch=TPIC8101# 

Thanks!