Hi Team,
My customer colay this part with others. So they would like to know if Pin19 and Pin 20 could be tied to ground or not if unused.
Please help to advise.
Thank you.
Jim
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi Jim,
The customer can leave pin 19 and 20 floating if unused (treat them as NC).
Thanks and Regards,
Raymond Lin
Hi Raymond,
My customer will tie them to ground instead of floating.
Please help to check if it is ok or not.
Thank you.
Jim
Hi Jim,
That should be fine, just make sure the customer doesn't enable the GPIO events.
Thanks and Regards,
Raymond Lin
Hi Raymond,
Sorry, I don't understand what GPIO events you are referring to? Pin19 and Pin20 should be USB2 DP/DM ESD protection, doesn't it?
Thank you.
Jim
Hi Jim,
Apologies for confusion, yes you are correct. Please disregard the previous mention about GPIO events, the customer can tie these pins to GND.
Thanks and Regards,
Raymond Lin