DS90UH948-Q1: Sample ordering help?

Adam Urban

I'm working on a new design that uses FPD-Link III serializer and deserializer ICs, specifically PNs DS90UH948 and DS90UH947. However, I have been unable to source any of these outside of the ones soldered on my eval boards.

Can anyone help me get some samples of these ICs for our initial prototype board spin?

over 3 years ago

0 Hamzeh Jaradat over 3 years ago

TI__Guru** 114940 points

Hi Adam,

UH948 and UH947 are both fully released parts, hence they are available online and can be 7only ordered through the TI store.

0 Adam Urban over 3 years ago in reply to Hamzeh Jaradat

Prodigy 40 points

But... they cannot actually be ordered from TI.com (or anywhere else) as best I can tell. This is what I see on the webpage:

0 Hamzeh Jaradat over 3 years ago in reply to Adam Urban

TI__Guru** 114940 points

Unfortunately this is the only way where you can order them from TI. Also you can order it from Arrow

0 Adam Urban over 3 years ago in reply to Hamzeh Jaradat

Prodigy 40 points

Arrow is showing a 35 week lead time and an MOQ of 250pcs. While that’s totally fine for production, it’s not an option for our preproduction testing and validation run. I need 5pcs, in next few weeks ideally (as soon as possible). The UB (non-HDCP) parts are fine for now.

These parts are holding up our entire project at this point. This type of request is exactly the purpose of your sample program, but our sample tickets keep getting rejected with no explanation. Is there someone that can help?

0 Hamzeh Jaradat over 3 years ago in reply to Adam Urban

TI__Guru** 114940 points

Hi Adam,

Please contact your local TI representative. This forum is for technical questions and design support. We really can't help here!

Interface

Interface forum

DS90UH948-Q1: Sample ordering help?