Because of the holidays, TI E2E™ design support forum responses will be delayed from Dec. 25 through Jan. 2. Thank you for your patience.

  • State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 32 subscribers
  • Views 172 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

SN65LVDS101: MADI to LVPCEL

Stefan Lintner
Expert 4925 points
Part Number: SN65LVDS101

Hi Team,

a customer is looking for an IC that takes MADI signal of 0.3V to 0.6mV amplitude.. with mean value of 0V

and convert it to LVPCEL of 800mV.

could you recommend a cost efficient solution?

BR,
Stefan

  • +1
    TI__Guru* 93670 points

    Hi Stefan,

    MADI is a single-ended-75-ohm interface used for digital audio. Converting this signal to LVPECL 800mV requires active device. Please ask this customer to send us a block diagram of this application. This would help us to clearly see the application and would help us to propose appropriate solution.

    Regards,Nasser