USB-C Port

Ray Vincent Aranzaso

Other Parts Discussed in Thread: TPS25750

Hi,

Good Day.

Customer is looking for an IC that will negotiate with USB-C port to supply the maximum current possible. What chip sets do you offer for this?

He is trying to pull the maximum 15W off a USBC port, he believe it need to negotiate with the host for this either using resistors or a interface IC. He see TI have some power switches which would provide protection, if you have any other interface IC's or a reference design using the power switches.

Please advise. Thank you very much.

Best Regards,

Ray Vincent

over 2 years ago

0 Bing Hwang over 2 years ago

TI__Intellectual 2370 points

Hi Ray,

The application is for dual port or single port? We have different Type-C/ PD controllers to meet the design.

Thanks.

Bing

0 Ray Vincent Aranzaso over 2 years ago in reply to Bing Hwang

TI__Mastermind 18180 points

Hi Bing,

Good Day. Please see below the response of our customer to your reply. Thank you very much.

TPS25750 sounds like it will work, do you have a Preconfigured simulation file for TI PSpice? Do you still gave out demo boards, TPS2570EVM should quickly confirm if it will meet my needs.

Best Regards,

Ray Vincent

0 Bing Hwang over 2 years ago in reply to Ray Vincent Aranzaso

TI__Intellectual 2370 points

Hi Ray,

TPS25750 is a pure Type-C/PD controller without DCDC integrated. Will check internally if there is a TI PSpice model for these kind of devices. For EVM, you can apply for it from https://tisamples.ti.com/

Thanks.

Bing

Interface

Interface forum

USB-C Port