DS90CR286: mapping of signals to FPGA

SVJS

Part Number: DS90CR286
Other Parts Discussed in Thread: SN65LVDS4

In our project, we are using DS90CR286 as camlink receiver IC and need to Map RXOut signals to FPGA. The FPGA we are using support only 1.8V bank. So please suggest a level translator for this mapping purpose.

over 2 years ago

0 Michael Ikwuyum over 2 years ago

TI__Guru 50236 points

Hi,

I would recommend taking a look at SN65LVDS4 for 1.8V applications.

However, I would further recommend using 3.3-V LVDS device to fulfil any additional channel requirement; interfaced with a voltage shifter, translating the 3.3 V to the needed 1.8V. Please see How to Support 1.8-V Signals Using a 3.3-V LVDS Driver/Receiver + Level-Shifter to further help with the implementation, thanks.

Best Regards,

Michael.

Interface

Interface forum

DS90CR286: mapping of signals to FPGA