This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi Experts,
Good day.
Would you please help us how to connect the SN65LVDS93B to this LCD port below?
Which mode should we use?
Please advise.
Keep safe.
Regards,
Josel
Hi Josel,
This is dependent on the panel/LCD that is being attached to the device. Please consult its datasheet or vendor to determine mode setting.
Regards,
Logan
Hi Logan,
Good day.
Please see this datasheet provided by the customer.
Amulet-Technologies-AM043NBG01-1713841.pdf
Please advise which mode is applicable.
Keep safe.
Regards,
Josel
Hi Josel,
What mode are you referring to? For questions regarding the attached display, you will need to consult the display vendor.
Was there a particular setting with the SN65LVDS93B you were needing help with?
Regards,
Logan
Hi Logan,
Good day.
The customer is referring to table 4 in the datasheet.
Regards,
Josel
Hi Josel,
Oh, so you are meaning model of PCB stack-up.
As mentioned in the datasheet and snippet you attached, if customer has complete freedom to choose the layer-stack up and implementation, it is recommended to reference/leverage the EVM.
Layer stack-up and order is largely a system/board level consideration, and depends on how many layers being used, proximity to other layers, etc. All in all, we should refer the customer to the EVM routing and the layout guidelines in the datasheet.
Regards,
Logan