• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 34 subscribers
  • Views 263 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

AM26C32: Switching characteristic and Skew

Shunsuke Nagata
Genius 13690 points

Part Number: AM26C32

Hi,

AM26C32I datasheet shows tPLH/tPHL as 9 ~ 27 ns. Is it possible to happen to one of output has 9ns and another output has 27ns? (e.g. The 1Y output has 9 ns but the 2Y has 27 ns..)

And the datasheet doesn't show the Skew. Is there information?

Regards,
Nagata.

  • 0
    TI__Guru 54042 points

    Hi Nagata,

    Extremely unlikely for that to happen. We don't have skew data for this part - but the variations in propagation delay overall are driven by temperature - so while pulse skew will increase with temperature it shouldn't be min/max conditions and in most likely cases should < ~5ns - 10ns in the worst case.

    Please let me know if you have any other questions.

    Best,

    Parker Dodson