• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 33 subscribers
  • Views 310 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DS90UB941AS-Q1: DS90UB941AS-Q1

Hale Tan
Expert 3770 points

Part Number: DS90UB941AS-Q1

Hi, team!

Could you help me find out what error is it if bit4 in above register is 0 when the screen becomes blurred and indistinct (like color vertical stripes) and bit4 is 1 after reset.

Then we test many times and bit4 is 0 after reset when it works normally.

Could you explain this phenomenon?

  • 0
    TI__Mastermind 22936 points

    Hi Hale,

    The bit indicates that the link is lost if the bit is 1, and the bit is normal if the bit is 0. There are several reasons for screen problems. Please refer to the checklist below.

    • Incorrect video timing, bpp, polarities
    • Initialization script issues or high level mode/configuration issues
    • Verify system / script bring-up flow (local PG, SER PG, end-to-end)

    Regards,

    Josh