DS90UB953A-Q1: Ask for differential IBIS model and package S parameter model

Scarlett Cao

Part Number: DS90UB953A-Q1

Hi team,

Our IBIS model of 953A on ti.com is single ended model, customer would like to know if we could provide the differential IBIS model for MIPI simulation?

Beside, they also would like to know if you could provide the package S parameter model for them to simulate.

Thanks

Scarlett

over 2 years ago

0 Hamzeh Jaradat over 2 years ago

TI__Guru** 108530 points

Hello Scarlett,

You can find the IBIS and IBIS-AMI models on the Share-Point.

We do not provide any S-parameters model.

0 Scarlett Cao over 2 years ago in reply to Hamzeh Jaradat

TI__Expert 4030 points

Hi Hamzeh,

We only found the single ended model in the sharefolder when importing to Ansys,

do we have differential model? Should be like below

Thanks

Scarlett

0 Hamzeh Jaradat over 2 years ago in reply to Scarlett Cao

TI__Guru** 108530 points

Scarlett,

now we have only the models on the share point. I can ask for you if there is any differential model planned!

0 Hamzeh Jaradat over 2 years ago in reply to Hamzeh Jaradat

TI__Guru** 108530 points

Hello Scarlett,

unfortunately, we do not have a differential IBIS model and it is not planned for the short term!

Interface

Interface forum

DS90UB953A-Q1: Ask for differential IBIS model and package S parameter model