LMH0387: Regarding value of RREF

Daisuke Higa

Genius 4585 points

Part Number: LMH0387

Hi support team.

We would like to adjust 800mV the amplitude of BNC_IO output.

What should be the value of RREF?

We observed 720mV with RREF=680ohm.

Best regards,

Higa

over 3 years ago

+1 Nasser Mohammadi over 3 years ago

TI__Guru* 93570 points

Greetings Higa,

You can reduce RREF value however please check eye shape/diagram. Optimum eye shape was achieved with 680-ohm RREF. Suggestion is to not go below 665-ohm RREF value.

Regards,nasser

Interface

Interface forum

LMH0387: Regarding value of RREF