• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 33 subscribers
  • Views 248 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LMH0366: Jitter performance

Shunsuke Yamamoto
Expert 8131 points
Part Number: LMH0366
Other Parts Discussed in Thread: LMH0397, LMH0318

Hi team,

I am new for this device, so could you please answer my questions?

1. My customer would like to make the output impedance 75 ohm with SDI output. Is it possible?

2. Cable driver IC without reclocker function like LMH0366 cannot suppress, and there is a possibility that the jitter would be non-standard. Is this understanding correct?

Best regards,

Shunsuke Yamamoto

  • +1
    TI__Guru* 93570 points

    Greetings,

    1). It is possible to use external 50 to 75-ohm adaptor and use this part. However, i strongly advise to use option noted below.

    2). Your understanding is correct.

    Please consider using LMH0318 or better yet LMH0397 for these applications. These devices have integrated cable driver and reclocker,

    Regards,Nasser