• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 32 subscribers
  • Views 190 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DS90LT012AQ-Q1: need pullup/down resistor

Shoo Saga
Intellectual 1881 points
Part Number: DS90LT012AQ-Q1

Hello team,

My customer want  to confirm the design of DS90LT012AQ-Q1.

Must the input of DS90LT012AQ-Q1 be required by adding pullup/down resistor in case they don't need fail safe circuit function?

if not, The value of Vth is 0V and the value of VTL is -100mV? 

Thanks,

Shoo

  • +1
    TI__Expert 7980 points

    Hello Saga-san,

    If the customer doesn't need the fail safe circuit then pullup/down resistors are not required. The differential threshold of the device is -100mV to 0V, meaning if the Input Differential Voltage (VID) equals 0 then the receiver's output will be High.

    Regards,

    Josh