DP83TD510E-EVM: 100Mbps to 10Mbps converter

Arne Kjerstad

Part Number: DP83TD510E-EVM
Other Parts Discussed in Thread: DP83TD510E, DP83822I

Hello Team,

When using the TD83TD510E-EVM in Media Converter configuration is it possible to run DP83822i at 100Mbps (100BASE-TX) and DP83TD510E at 10Mbps? If so how to configure this.

over 2 years ago

0 Evan Mayhew over 2 years ago

TI__Mastermind 24998 points

Hi Arne,

No, the media converter will not work if the PHYs are forced in different speeds.

As the 510 cannot auto-negotiate speeds, both PHYs need to be forced in the same speed to link up properly.

Thank you,

Evan

Interface

Interface forum

DP83TD510E-EVM: 100Mbps to 10Mbps converter