TUSB9261DEMO: tusb9260_link.cmd missing

Eric Nantas Pacor

Part Number: TUSB9261DEMO
Other Parts Discussed in Thread: TUSB9260, TUSB9261

Hello,

I'm trying to compile TUSB9261 firmware source code but in the linker command file there is a reference to a library "tusb9260_link.cmd" that is not present in the source code package.

Where could I download it?

Regards

Eric Pacor

over 2 years ago

0 Nicholaus_Malone over 2 years ago

TI__Mastermind 27925 points

Hi Eric,

I am looking into this issue and will respond within 24 hours.

Regards,

Nicholaus

0 Eric Nantas Pacor over 2 years ago

Prodigy 20 points

Hi Nicholaus,

Thank you

0 Nicholaus_Malone over 2 years ago in reply to Eric Nantas Pacor

TI__Mastermind 27925 points

Hi Eric,

Did you receive the MySecure invitation for the TUSB9261 firmware? I'm looking at the folder and see the file you are referring to.

Regards,

Nicholaus

0 Eric Nantas Pacor over 2 years ago in reply to Nicholaus_Malone

Prodigy 20 points

Hi Nicholaus,

no i didn't receive the invitation. I've checked also in spam and I don't find it.

Could you please resend it?

Thank you

Regards

Eric

0 Nicholaus_Malone over 2 years ago in reply to Eric Nantas Pacor

TI__Mastermind 27925 points

Hi Eric,

Sorry, I meant the version that you have was not acquired through MySecure? I see our previous chat history now; I will follow up through E2E direct message.

Thanks,

Nicholaus

0 Eric Nantas Pacor over 2 years ago in reply to Nicholaus_Malone

Prodigy 20 points

Hi,

yes I downloaded from mysecure last october but the file is not present the archive. I just downloaded again but the file is still not present.

Eric

+1 Nicholaus_Malone over 2 years ago in reply to Eric Nantas Pacor

TI__Mastermind 27925 points

Hi Eric,

The screenshot above is from the TUSB926x_FW_v1.05_source.zip file that is installed from the MySecure page, so I'm not sure why it is not showing for you.

I will send you another invite just in case.

Regards,

Nicholaus

Interface

Interface forum

TUSB9261DEMO: tusb9260_link.cmd missing