SN65HVD72: Internal structure

Maite Magro

Part Number: SN65HVD72

I would like to know if the internal structure of this component (in X-Ray) could be different depending on the COO or the revision of the die.

I have found different structures for this component and I wpuld like to know if it could be a counterfit.

Thanks in advance

over 2 years ago

0 Parker Dodson over 2 years ago

TI__Guru 52172 points

Hi Maite,

This is not information that we share.

Can you please share part markings of suspect part and I can check if you should go through our counterfeit part process. This will help me to see if the part marking is in our system.

Best,

Parker Dodson

0 Maite Magro over 2 years ago in reply to Parker Dodson

Prodigy 20 points

Hi Parker,

Can you please check these two markings?

regards,

+1 Parker Dodson over 2 years ago in reply to Maite Magro

TI__Guru 52172 points

Hi Maite,

I suspect these may be counterfeit devices

Please if you could go to our counterfeit page for information on next steps: https://www.ti.com/support-quality/quality-policies-procedures/anti-counterfeit.html

Best,

Parker Dodson

0 Maite Magro over 2 years ago in reply to Parker Dodson

Prodigy 20 points

Thank you for your help.

Interface

Interface forum

SN65HVD72: Internal structure