TLK110: How to find "MaxPortRxDelay" and "MaxPortTxDelay" from phy datasheet

Hi Andy,

TLK110 is Not Recommended for New Design. Therefore, we don't have any information other than in the datasheet. We highly recommend using DP83822 or DP83826 family for the new design.

--

Sincerely,

Hillman Lin

Hi Hillman,

I'll follow your advice to use DP83822 or DP83826 family.

How should I set these MaxPortRxDelay and MaxPortTxDelay in PROFINET GSD? Which value in the DP83822 or DP83826 datasheet corresponds to these?

You can see the AMIC110 ICE. DP83822 is used to AMIC110 ICE. I just want to know how to calculate the MaxPortRxDelay and MaxPortTxDelay according to the PHY datasheet. I need to know the principle of calculation.  Your industrial communication expert should know.

Best Regards,

Andy Zhou

Hi Andy,

I saw your "MaxPortRxDelay" and "MaxPortTxDelay" are causes by the AMIC110. I will forward you to the MCU team.

--

Thank you,

Hillman Lin

Hi Hillman,

Is there any reply from the MCU team ? I've been waiting for over a week !

Best Regards,

Andy Zhou

This thread was incorrectly assigned to me. I will need to find someone that can answer questions about PROFINET software.

Regards,
Paul