• State TI Thinks Resolved
  • Locked Locked
  • Replies 2 replies
  • Answers 2 answers
  • Subscribers 34 subscribers
  • Views 289 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TLIN1024A-Q1: TLIN1024

Manoj Agarwal
Prodigy 250 points
Part Number: TLIN1024A-Q1
Other Parts Discussed in Thread: TLIN1021A-Q1, TLIN1028-Q1

Hi team,

Any solution to have INH output for Device TLIN1024. I checked NXP device SJA1124 is having thta so replacement of SJA1124 will also work. We are doing new design so for us to consider new desing chips support. currently we consider TLIN1024 but noticed missing IHN pin.

  • 0
    TI__Guru 74292 points

    Manoj,

    We don't currently have a quad-LIN transceiver with INH. The TLIN1021A-Q1 has INH, but this is a single-channel LIN transceiver. We have brought this up to our development team to consider for future development.

    Regards,

    Eric Hackett

  • 0
    TI__Mastermind 26826 points

    Manoj,

    Eric is correct in his comment above. At the moment, the only TI solution that has four INH outputs for four LIN channels would be to have four discrete TLIN1021A-Q1 devices.

    Maybe a long-shot, but if the power requirements are met, would four discrete TLIN1028-Q1 devices work? These LIN SBCs have internal LDOs. This does not have INH output, but if your design uses four discrete power supply ICs, this could possibly reduce your BOM.

    Best,

    Danny