Hi Team,
What's the step of each setting in SLEW_3G and SLEW_6G? (How many V/us?)
Why are the four highlighted fields not 3'b000 ~ 3'111 since I believe there are total 8 options we can select from, right?
Thanks!
Roy
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi Team,
What's the step of each setting in SLEW_3G and SLEW_6G? (How many V/us?)
Why are the four highlighted fields not 3'b000 ~ 3'111 since I believe there are total 8 options we can select from, right?
Thanks!
Roy
Hello, Roy,
You would take the rise and fall time data as shown below:
Then you would take the Vswing(max) and Vswing(min) per the HDMI 1.4 and 2.0 specs and you can get to a slew rate control.
Thanks,
Zach
Thanks, Zach. But I don't think you've fully answered my questions.
What's the step of each setting in SLEW_3G and SLEW_6G? (How many V/us?)
Why are the four highlighted fields not 3'b000 ~ 3'111 since I believe there are total 8 options we can select from, right?
Could you look at them again?
Thanks,
Roy
Roy
I am checking to see if we have the characterization data for this question.
Thanks
David