• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 33 subscribers
  • Views 170 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

THS8200: In IBIS model Pin 15 17 19 was assigned as Power instead of Output.

Vigneswaran Nagarajan
Prodigy 10 points
Part Number: THS8200

In IBIS model Pin 15 17 19 was assigned as Power instead of Output. Since its analog so that any model is not assigned?  Please suggest on this how to do SI simulation for these pins?

  • 0
    TI__Guru**** 191296 points

    Hi,

    I am sorry, we no longer offer any support for this device on the E2E forum. You may search the E2E forum for archived posts of previous discussions which may help address your questions. Sorry for lack of guidance.

    I think these are analog pins and therefore modeled as power pins.