• State TI Thinks Resolved
  • Locked Locked
  • Replies 2 replies
  • Answers 1 answer
  • Subscribers 32 subscribers
  • Views 216 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPD2S701-Q1: Asking for TPD2S701-Q1 design review and suggestions

SHH
Mastermind 31446 points
Part Number: TPD2S701-Q1
Other Parts Discussed in Thread: TPD6S300

Hi Team,

Customer would like to design TPD2S701-Q1.


Would you please help review  schematic and provide your comments?

 1. Please assist in providing detailed specifications for the ESD Clamps in the OVP circuit.

 2. The TPD6S300 specifications and TLP curve reference for TVS are provided below. If the provided TVS has a snap-back feature, it is also necessary to provide the Vhold (V)/ Ihold (mA) values for evaluation.

 

Thanks for help!

 

Scott

  • 0
    TI__Mastermind 18556 points

    Hi Scott,

    1, For the schematic review, I can't see you attached, could you please add your schematic in the attached, or send it to me by email, thank you.(Kuno-wu@ti.com)

    2, For your request about the ESD clamps, sorry, we don't have this char inside, but we have one topic about this, hope it will be helpful for you. Thank you.

    Best Regards,

    Kuno

  • 0 in reply to Kuno Wu
    TI__Mastermind 18556 points

    Hi Scott,

    We already have email to communicate, I will close this thread first, if you have some new questions, feel free to submit a new thread or contact with me by email, thank you.

    Best Regards,

    Kuno