• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 34 subscribers
  • Views 337 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TCAN1043A-Q1: Wake Up Pattern

alex dchk
Prodigy 220 points

Part Number: TCAN1043A-Q1

How WAKE UP parameter can be reflected in the CAN command?

Does TCAN1043A-Q1 supports partial networking?

  • +1
    TI__Guru 74492 points

    Alex,

    No, the TCAN1043A-Q1 does not support partial networking. All CAN transceivers in the TCAN family have the ability to monitor the bus for the simple WUP (dominant->recessive->dominant) and indicated through the RXD pin being low in Standby mode that a WUP has been received. In the TCAN1043A-Q1 case, the device will actually transition from Sleep to Standby mode in the event that a WUP is received while in Sleep mode. 

    Please let us know if you have any other questions or concerns.

    Regards,

    Eric Hackett