TUSB1210: How to do USB2 HOST Compliance test on TUSB1210.

Motoyasu Hattori

Genius 11105 points

Part Number: TUSB1210

Hi,

My customer wants compliance test of USB2 Host on TUSB1210BRHB.

To do compliance test, what setting of TUSB1210 do they need to do?

Please advise us.

Thanks and best regards,
M.HATTORI

over 2 years ago

0 Brian Zhou over 2 years ago

TI__Guru*** 146695 points

is this Linux or windows system?

Regards

Brian

0 Motoyasu Hattori over 2 years ago in reply to Brian Zhou

TI__Genius 11105 points

Brian-san,

No, OS is VxWorks. Does they need to run some software on MCU side?

Thanks and best regards,
M.HATTORI

0 Brian Zhou over 2 years ago in reply to Motoyasu Hattori

TI__Guru*** 146695 points

only has test tool for windows,for other OS systems

Here is the instruction for UBS2 compliance test.

USB2 compliance test section,

Reference to section 11.24.2.13 Set Port Feature of the USB2.0 spec

When the feature selector is PORT_TEST, the most significant byte (bits 15..8) of the wIndex field is the selector identifying the specific test mode.

Table 11-24 lists the test selector definitions.

Interface

Interface forum

TUSB1210: How to do USB2 HOST Compliance test on TUSB1210.