• State TI Thinks Resolved
  • Locked Locked
  • Replies 2 replies
  • Answers 2 answers
  • Subscribers 34 subscribers
  • Views 562 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Replacement part for DS89C387TMEA

Mark Hogsett
Prodigy 25 points

Other Parts Discussed in Thread: AM26C31, AM26LV31

Is there a recommended replacement part or solution for the subject  obsolete part.  Datasheet link is below.

https://media.digikey.com/pdf/Data%20Sheets/Texas%20Instruments%20PDFs/DS89C387.pdf

Thank you.

Mark Hogsett

  • 0
    Guru 319890 points

    There is no replacement with 12 drivers.

    The largest multichannel drivers like AM26C31/AM26LV31(E) have four channels.

  • 0
    TI__Guru 53462 points

    Hi Mark,

    Clemens is correct - the best option we have are the quad drivers listed. So no single chip solutions unfortunately and if we are going by TI parameter codes - it would be an F as the device you point to -has faster propagation time - so there could be some timing issues if pushing near the max -I don't think its too much of an issue most of the time - but its something to be aware of. The non LV device may be best as it works with the 5V supply.

    Best,

    Parker Dodson