DS90UB935-Q1: Configuration script

Ning Li

Intellectual 750 points

Part Number: DS90UB935-Q1
Other Parts Discussed in Thread: ALP

Dears,

Customer want to test the DMS camera with DS90UB935&DS90UB936.The camera parameter shows below:

1.1600*1300

2.Frame rate:30

3.Data form:UYVY

Pls kindly help to provide the Configuration script.

Thanks

over 2 years ago

0 Vivaan Jaiswal over 2 years ago

TI__Expert 6445 points

Hi Ning,

We are looking into this and will get back to you soon

Regards,

Vivaan

0 Vivaan Jaiswal over 2 years ago in reply to Vivaan Jaiswal

TI__Expert 6445 points

Hi Ning,

The 935 and 936 do not require a configuration script. These devices are able to establish lock on their own. If you need a script for a specific purpose, there are a few examples scripts under Analog LaunchPAD v1.57.0010\PreDefScripts\DS90UB954. Note: Since the 936 and 954 share a register map, these scripts would also work on the 936.

Regards,

Vivaan

0 Ning Li over 2 years ago in reply to Vivaan Jaiswal

Intellectual 750 points

Hi Vivaan,

Thanks for your support,I want to know Analog LaunchPAD v1.57.0010\PreDefScripts\DS90UB954 is in the spec or is a internal link?

Thanks

0 Vivaan Jaiswal over 2 years ago in reply to Ning Li

TI__Expert 6445 points

Hi Ning, I am referring to the ALP directory on your computer. Analog LaunchPad is a software by TI that is used to interface with our FPD-Link Devices. You can find more information about it here

https://www.ti.com/tool/ALP

Regards,

Vivaan

Interface

Interface forum

DS90UB935-Q1: Configuration script