DAC80508 EVM

Pietro di Castri

Prodigy 60 points

Good morning

The document DACx0508EVM Software Setup

deals with a software for the setup of the DACx0508EVM.

I need that software.

Thank You

Pietrp

over 2 years ago

0 Katlynne Jones over 2 years ago

TI__Mastermind 42163 points

Hi Pietrp,

The software is available on the DAC80508EVM tool folder: www.ti.com/.../DAC80508EVM

Best,

Katlynne Jones

0 Pietro di Castri over 2 years ago in reply to Katlynne Jones

Prodigy 60 points

Hei

Thank You for the help. I downloaded and proceeded with the installation.
After the installation of the LabView runtime I have this message

The LabView appears to be correctly installed. But is unreachable.

Have You suggestions??

Thank You

Pietro

0 Katlynne Jones over 2 years ago in reply to Pietro di Castri

TI__Mastermind 42163 points

Hi Pietro,

Can you try downloading the 2014 Labview run-time engine? It's possible that the run time engine wasn't included in the installer, or your computer did not install it during the installation process.

https://www.ni.com/en/support/downloads/software-products/download/unpackaged.labview-runtime.306245.html

Best,

Katlynne Jones

0 Katlynne Jones over 2 years ago in reply to Katlynne Jones

TI__Mastermind 42163 points

Let me clarify, can you make sure the Labview runtime is the 32-bit version as I have shown in the screenshot?

0 Pietro di Castri over 2 years ago in reply to Katlynne Jones

Prodigy 60 points

Good morning

That's what I get if I launch the manager

Let me know if I need to do something

Thank You

Pietro

+1 Katlynne Jones over 2 years ago in reply to Pietro di Castri

TI__Mastermind 42163 points

Hi Pietro,

Yes, that looks like the 64-bit 2023 version of the labview runtime. Please try downloading the 32-bit 2014 version that I linked in my last response.

Best,

Katlynne Jones

0 Pietro di Castri over 2 years ago in reply to Katlynne Jones

Prodigy 60 points

It worked

Thank You

Pietro

Interface

Interface forum

DAC80508 EVM