DS160PT801: layout guide

GARETH OU

Guru 11905 points

Part Number: DS160PT801
Other Parts Discussed in Thread: DS160PR410

Could you help provide DS160PT801 layout guide

over 2 years ago

0 Nasser Mohammadi over 2 years ago

TI__Guru* 93570 points

Hi Gareth,

1). Typically at the end of the data sheet or chapter 9 or 10, there is pcb layout recommendation.

2). Also, recently we released PCIe Gen5 pcb layout recommendation which can be used for DS160PT801 as well. Please below note a link to this application note:

https://www.ti.com/lit/an/snla426/snla426.pdf?ts=1693941145233&ref_url=https%253A%252F%252Fwww.ti.com%252Fproduct%252FDS320PR1601%253FkeyMatch%253DDS320PR1601%2526tisearch%253Dsearch-everything%2526usecase%253DGPN-ALT

Regards, Nasser

0 GARETH OU over 2 years ago in reply to Nasser Mohammadi

Guru 11905 points

Hi Nasser

Is there any rule for the front and rear trace lengths of the re-timer DS160PT801 and DS160PR410? Thank you

0 Nasser Mohammadi over 2 years ago in reply to GARETH OU

TI__Guru* 93570 points

Hi Gareth,

Yes there is. Application note that we referred you to earlier, applies to traces between the device and root complex and the end point(front and rear traces).

Regards, Nasser

Interface

Interface forum

DS160PT801: layout guide