DS125DF410EVM: Question of SigCon tool

Minkyu Cho

Prodigy 30 points

Part Number: DS125DF410EVM
Other Parts Discussed in Thread: DS125DF410, USB2ANY, ALP

Hi, this is Minkyu Cho.

I have a question about SigCon.

I want to use the SigCon tool and I have a this dongle same as a attahchment.

Can I use this dongle to use SigCon tool ?

over 2 years ago

0 Minkyu Cho over 2 years ago

Prodigy 30 points

I can't attach the file. So I have a this one.

-> SIOEVK SPA DONGLE SV013413-001

0 Evan Mayhew over 2 years ago in reply to Minkyu Cho

TI__Mastermind 24988 points

Hi Minkyu,

Yes, the SV013413 dongle is a valid method of interfacing with the DS125DF410 in SigCon.

Thank you,

Evan

0 Minkyu Cho over 2 years ago in reply to Evan Mayhew

Prodigy 30 points

Thanks for your reply.

But when I was execute the Sigcon, this message find out. " There are no USB2ANY interfaces detected."

What is my next step ?

0 Evan Mayhew over 2 years ago in reply to Minkyu Cho

TI__Mastermind 24988 points

Hi Minkyu,

Please share a picture of your setup so I may check the connections.

Thank you,

Evan

0 Minkyu Cho over 2 years ago in reply to Evan Mayhew

Prodigy 30 points

How can I upload the picture ??

It doesn't operate normally, drag and drop and insert image are not operating.

If you let me know your email.
I will send you.

0 Evan Mayhew over 2 years ago in reply to Minkyu Cho

TI__Mastermind 24988 points

Please send to e-mayhew@ti.com

Thank you,

Evan

0 Evan Mayhew over 2 years ago in reply to Evan Mayhew

TI__Mastermind 24988 points

Hi Minkyu,

Correction to my initial response - SV013413 SPA dongle is intended for a previous generation of software, ALP (Analog LaunchPad). The SPA dongle will not work as a USB2ANY adapter in SigCon.

For connecting the board to SigCon, you will need to use a USB2ANY adapter.

https://www.ti.com/tool/USB2ANY

Thank you,

Evan

Interface

Interface forum

DS125DF410EVM: Question of SigCon tool