• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 34 subscribers
  • Views 935 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TCAN1167-Q1: Safety FMEDA report- Fit data

Linda Wu
Prodigy 10 points

Part Number: TCAN1167-Q1

In FMEDA report, what does safety related Fit means? What‘s the single point +residual failure rate?  the date in below table not quite clear, take permanent of die  as an example, does  single point +residual failure rate= 8.13 fit or = 8.13*69.36% ？

  • 0
    TI__Mastermind 26836 points

    Hi Linda,

    Thanks for reaching out. These definitions are provided earlier in the document in section 2.2.6 "Totals - ISO26262 Tab" for SFFS142. Safety related FIT is defined here as the subset of the total FIT (failure-in-time) that includes only the design blocks or device pins that are indicated as safety related.

    The percentages in the last two rows represent the percentage of the total coverage that is present for detecting/preventing SPF or LF conditions.

    Also, please keep in mind that the table you're looking at is just an example calculation table within a section titled 2.3 "Example Calculation of Metrics" - it might not match exactly what your systems requirements might require and might produce using the full FMEDA spreadsheet tool.

    Best,

    Danny