DS90CR286A: abnormal display

Haury Zhou

Part Number: DS90CR286A

Hi team,

Related sch. review e2e thread.

https://e2e.ti.com/support/interface-group/interface---internal/f/interface---internal-forum/1228560/ds90cr286a-schematic-review?tisearch=e2e-sitesearch&keymatch=DS90CR286%20haury#

Customer found abnormal display issue when tuning the functions as the below capture.

System block:

Sch. design:

Test:

1. TCON pattern is OK.

2. If customer bypass DS90CR286A and use OLDI display panel, the display is OK.

Could you help to give some debugging suggestions?

BRs,

Haury

over 2 years ago

0 Ben Dattilo over 2 years ago

TI__Mastermind 25765 points

Hi Haury,

I think the image may be too low resolution, I do not see the distortion you are talking about. Can you describe it?

Regards,

Ben

0 Haury Zhou over 2 years ago in reply to Ben Dattilo

TI__Expert 7316 points

Hi Ben,

Sorry for the delayed reply.

Customer will update the details for the issue in this thread. Let's wait for customer's response.

BR,

Haury

0 Haury Zhou over 2 years ago in reply to Haury Zhou

TI__Expert 7316 points

Could you help to move the thread to public interface forum?

0 Ben Dattilo over 2 years ago in reply to Haury Zhou

TI__Mastermind 25765 points

Hi Haury,

Thank you. I have moved the thread to public. I also edited the block diagram you posted to exclude NDA material so I could post it to public (removed SER part number).

Regards,

Ben

Interface

Interface forum

DS90CR286A: abnormal display