DS80PCI402: How to use IBIS-AMI

Kunihiko Ogawa

Part Number: DS80PCI402

I would like to perform a circuit simulation by changing the emphasis and equalizer settings using the DS80PCI402 IBIS-AMI model, but how should I use it in the simulator?

over 2 years ago

0 Nick Peabody over 2 years ago

TI__Genius 9209 points

Hi Kunihiko,

Hope you are doing well. What simulator software are you using? Texas Instruments uses Keysight ADS for part validation.

Could you send a screenshot of the page so that we may be able to help more easily.

Best,

Nick

0 Nick Peabody over 2 years ago in reply to Nick Peabody

TI__Genius 9209 points

Please send a friend request along with your company email address as well.

Best,

Nick

0 Kunihiko Ogawa over 2 years ago

Prodigy 20 points

Hello Nick,

Thank you for reply.

I uses ANSYS Electronics Desktop as the circuit simulator.

Best regards,

Kunihiko Ogawa

0 Nick Peabody over 2 years ago in reply to Kunihiko Ogawa

TI__Genius 9209 points

Hi Kunihiko,

Hope your day is going well. If you don't have the IBIS-AMI model, send a friend request to me. I will send you an IBIS-AMI model and an applications note for Keysight ADS.

If you want to keep using ANSYS, we will not be able to help you because we do not have support for that software.

Best,

Nick

+1 Kunihiko Ogawa over 2 years ago

Prodigy 20 points

Hi Nick,

Sorry for the late reply.

I have already got the IBIS-AMi Mdel according to the required procedure.

I try to simulate with ANSYS's tool and contact for ANSYS to solve any problem in detail.

Best Regards,

Kunihiko Ogawa

0 Nick Peabody over 2 years ago in reply to Kunihiko Ogawa

TI__Genius 9209 points

Hi Kunihiko,

Glad to hear it. If you have further questions, please feel free to reopen this thread.

Best,

Nick

Interface

Interface forum

DS80PCI402: How to use IBIS-AMI