TS3DV642-Q1: IBIS AMI model and PKG S parameter of TS3DV642-Q1

Ted Xu

Part Number: TS3DV642-Q1

HI BU team

Would you help share the TS3DV642-Q1 IBIS AMI model and PKG S parameter model? Customer wanted to get them for the SI simulation.

Thanks

over 2 years ago

0 David (ASIC) Liu over 2 years ago

TI__Guru**** 178126 points

Hi,

We only have s-parameter model available for TS3DV642-Q1, please see this e2e thread, https://e2e.ti.com/support/interface-group/interface---internal/f/interface---internal-forum/1089578/ts3dv642-q1-s4p-file?tisearch=e2e-sitesearch&keymatch=ts3dv642 to download the s-parameter.

Thanks

David

0 Ted Xu over 2 years ago in reply to David (ASIC) Liu

TI__Expert 4635 points

Hi David

Thanks for your comments and sharing.

But for high-speed design, it is necessary to do the SI simulation firstly. Would you share the development plan of IBIS-AMI model?

Thanks

0 David (ASIC) Liu over 2 years ago in reply to Ted Xu

TI__Guru**** 178126 points

Hi,

TS3DV642-Q1 is a passive MUX only, there is no active components such as equalizer, CDR, or DFE in its design. In this case, a s-parameter model is sufficient for the simulation.

Thanks

David

0 Ted Xu over 2 years ago in reply to David (ASIC) Liu

TI__Expert 4635 points

Hi David

Thanks very much for your quick response.

0 Adam Frew over 1 year ago in reply to David (ASIC) Liu

Prodigy 30 points

Hi, when I try to follow this link I get "Page Not Found"

e2e.ti.com/.../ts3dv642-q1-s4p-file

0 Zach Dryer over 1 year ago in reply to Adam Frew

TI__Genius 13310 points

Hello, Adam,

What information are you looking for in particular?

Thanks,

Zach

0 Adam Frew over 1 year ago in reply to Zach Dryer

Prodigy 30 points

Hi Zach,

I'm looking for the s-parameter model which David attempted to link. However when I follow his link I get "Page not found".

Thanks,

Adam

0 Zach Dryer over 1 year ago in reply to Adam Frew

TI__Genius 13310 points

Hello, Adam,

Please accept my friendship request so that I can send the model in a private message.

Thanks,

Zach

0 Adam Frew over 1 year ago in reply to Zach Dryer

Prodigy 30 points

Hi Zach,

I've accepted your friendship request.

Thanks,

Adam

0 Zach Dryer over 1 year ago in reply to Adam Frew

TI__Genius 13310 points

Adam,

I responded to your request.

Thanks,
Zach

0 David (ASIC) Liu over 1 year ago in reply to Zach Dryer

TI__Guru**** 178126 points

Adam

There is an issue with the s-parameter model being sent by Zach, please see attached update model.

https://e2e.ti.com/cfs-file/__key/communityserver-discussions-components-files/138/8562.TS3DV642Q1_5F00_s4p_5F00_10G.7z

Thanks

David

Interface

Interface forum

TS3DV642-Q1: IBIS AMI model and PKG S parameter of TS3DV642-Q1