Hi,
Our customer intends to use 27MHz Xtal for REFCLK, is there any information on the recommended tolerance (ppm)?
Best regards,
Hiroshi
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi,
Our customer intends to use 27MHz Xtal for REFCLK, is there any information on the recommended tolerance (ppm)?
Best regards,
Hiroshi
Hey Hiroshi,
The recommended tolerances of the REFCLK can be found under the table 6.6 in the SN65DSI84 datasheet.