TCAN1044V-Q1: CAN Bus GND Short

Yuya Shoji

Part Number: TCAN1044V-Q1

Hi team,

I have a question. Can STB pin (STB=High) transit this device into standby mode even under can bus GND shorted condition? Previously, my customer observed that STB pin didn't change the mode into standby mode under such GND short condition. This is why I'm concerning this.

Best Regards,

Shoji

over 2 years ago

+1 Eric Hackett over 2 years ago

TI__Guru* 75082 points

Shoji-san,

The CAN bus shorted to GND should still allow the device to go into Standby mode. How is the customer verifying the mode when the STB pin is in a logic-high state?

Regards,

Eric Hackett

0 Yuya Shoji over 2 years ago in reply to Eric Hackett

TI__Expert 8010 points

Hi Eric,

Thank you for your answer. So far asking the customer, they don't have detailed information because the problem is reported from OEM and OEM didn't provide enough information to my customer.

I'll make a new thread if my customer tell me the detailed information.

Best Regards,

Shoji

Interface

Interface forum

TCAN1044V-Q1: CAN Bus GND Short