• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 33 subscribers
  • Views 205 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

SN75LVPE5421: IBIS AMI + package s-parameters

SN75LVPE5421: 25G network signal MUX application and SI simulation model request

Matt Qi
Expert 4510 points
Part Number: SN75LVPE5421

Hi

My customer wants to ask two related questions, and I cannot find it in the datasheet or TI website.

1. Can this mux be used to switch 25G network signals?
2. Please help provide the SI simulation model

Looking forward to your reply, and thanks a lot.

  • 0
    TI__Guru* 93670 points

    Hi Matt,

    1). Yes. I think your customer could be thin king about SAS4 application or Ethernet. Note for these applications they have to bypass RX detec(i.e force 50-ohm termination).

    2). We strongly recommend using IBIS-AMI model of the device to do signal integrity analyses first. Please send me customer email address and we can provide these models.

    Regards, Nasser