DS160PT801X16EVM: EVM test

GARETH OU

Part Number: DS160PT801X16EVM
Other Parts Discussed in Thread: DS160PT801

The customer tested the Intel PCIE Gen4 IOMT tool according to the user manual default jumper setting and it currently fails.

Is there any side of the EVM where I can adjust driving, swing, and jitter?

Do I need to download software to change the register value?

Thank you.

over 2 years ago

0 David Waier over 2 years ago

TI__Mastermind 20901 points

Hi Gareth,

Thank you for reaching out. We typically recommend programming the DS160PT801X16EVM's EEPROM for tuned performance using EEPROM images available on the DS160PT801 secure folder. Please use this link to request access to this and additional information for the DS160PT801.

Best,
David

0 GARETH OU over 2 years ago in reply to David Waier

Guru 11445 points

Hi David

After the customer installs the GUI, the demo board device cannot be recognized when opening the program. Does the link you provided last time contain the DS160PT801 profile?

0 David Waier over 2 years ago in reply to GARETH OU

TI__Mastermind 20901 points

Hi Gareth,

Yes. The link above directs users to request access, where this file can be then accessed.

Best,
David

0 Gary Teng over 1 year ago in reply to David Waier

Genius 5850 points

Hi David,

We just get full datasheet at secure folder. Is there any other folder we have to request authority to get the profile? Thanks for your kindly help.

Regards,

Gary

0 David Waier over 1 year ago in reply to Gary Teng

TI__Mastermind 20901 points

Hi Gary,

This folder should additionally contain the SigCon Architect GUI profile under the 'Design Tools' section. Please let me know if you can view and download this.

Best,
David

0 David Waier over 1 year ago in reply to David Waier

TI__Mastermind 20901 points

Marking as resolved due to inactivity.

Interface

Interface forum

DS160PT801X16EVM: EVM test