• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 31 subscribers
  • Views 776 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[FAQ] DP83822I: How to use RMII repeater mode in DP83822?

Hillman Lin
Mastermind 24585 points
Part Number: DP83822I

Could someone guide me on how to use DP83822 for RMII repeater mode?

  • 0
    TI__Mastermind 24585 points

    Main functionality of the RMII back-to-back repeater mode is to extend the cable reach. RMII repeater mode required to configure CRS_DV pin of RMII interface to RX_DV pin for back-to-back operation through either software configuration or hardware configuration.