AM26C32M: The driver device that can be paired with AM26C32MDREP

Noriyuki Takahashi

Genius 10980 points

Part Number: AM26C32M
Other Parts Discussed in Thread: AM26C31M

Hi team

Could you tell the driver device that can be paired with AM26C32MDREP?

Regards,

Noriyuki Takahashi

over 1 year ago

0 Clemens Ladisch over 1 year ago

Guru 316780 points

In general, the '32 receiver is paired with the corresponding '31 transmitter, i.e., the AM26C31M. But you can use any RS-422 driver.

+1 Parker Dodson over 1 year ago

TI__Guru 52192 points

Hi Takahashi-san,

Our best option, as Clemens also indicated, would be the AM26C31MDREP. Since it is EP it does link to a different page than the AM26C31M without EP does - so the correct page can be found here: https://www.ti.com/product/AM26C31-EP/part-details/AM26C31MDREP?keyMatch=AM26C31MDREP&tisearch=search-everything&usecase=OPN as searching AM26C31M may land you on the wrong product page.

Best,

Parker Dodson

0 Noriyuki Takahashi over 1 year ago in reply to Parker Dodson

TI__Genius 10980 points

Hi team

Could you tell recommended receivers/drivers that are similar with AM26C32MDREP and have EVMs?

Regards,

Noriyuki Takahashi

+1 Parker Dodson over 1 year ago in reply to Noriyuki Takahashi

TI__Guru 52192 points

Hi Takahashi-san,

Really our best and only viable option is the AM26C32MDREP - but we don't have an EVM for any of our quad devices at the moment - hopefully we will be able to rectify in the future (hopefully in 2024 sometime)- but for the time being the best option is to use generic break-out boards that fit the package.

Best,

Parker Dodson

Interface

Interface forum

AM26C32M: The driver device that can be paired with AM26C32MDREP