• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 33 subscribers
  • Views 211 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DS90UB949A-Q1EVM: na

xingquan.zhou
Prodigy 10 points
Part Number: DS90UB949A-Q1EVM
Other Parts Discussed in Thread: ALP

Can I use the host computer to control the DS90UB949A-Q1EVM demo board? , how to control it? Can you send relevant documents?

  • 0
    TI__Genius 13240 points

    Hi Xingqquan,

    To get started with the DS90UB949A-Q1EVM demo board you will need the following:

    1. Analog LaunchPad Software which can be downloaded here.
      1. Downlaod the Analog LaunchPad Framework Utility first
      2. Once the framework is installed downlaod the ALP-PROFILE
        1. This hold the ALP profile which will allow you to talk to the EVM through the ALP software
    2. You can take a look at the EVM user guide. This provides a step by step on how to work with the EVM.

    Best Regards,

    Gil Abarca