• State TI Thinks Resolved
  • Locked Locked
  • Replies 2 replies
  • Answers 1 answer
  • Subscribers 35 subscribers
  • Views 426 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DS160PT801: DS160PT801

Prashanth Pai B Pai
Prodigy 250 points

Part Number: DS160PT801

Hi TI team,

Due to space constraint in BGA area,  can I share one decap for 2 power pins of Retimer chip  of 1.17V voltage nets ?

Please note that this violation is for only   2 or 3 power pins of Retimer chip.

 

Thanks ,

Prashanth Pai B

  • 0
    Prodigy 250 points

    As per datasheet, Is this required decap? please suggest

    [ Redacted confidential information - Evan Su ]

  • 0 in reply to Prashanth Pai B Pai
    TI__Mastermind 18780 points

    Hi Prashanth,

    Please do not post direct information from the datasheet on this public forum, the document is confidential.

    I have not tested or seen the effects of sharing decoupling capacitors on this device, in general I believe it may lead to more observed noise from the increased coupling between power pins. The datasheet recommendations for decoupling are intended to be sufficient for most applications. If you have space limitations that prevent the use of as many decoupling capacitors as recommended, the design could still function if the power supply is relatively clean, but we have no information on this and you would have to test it yourself.

    Best,

    Evan Su