DP83TD510E: Recommended surge protection devices

Kenji Ohno1

Genius 5095 points

Part Number: DP83TD510E

Hi Team,

I know that the DP83TD510E has been tested for surge ratings IEC61000-4-5 Surge ±2KV.

My customer is considering installing lightning surge protection outside the equipment to make it more robust.

Is there a recommended manufacturer of Surge Protective Device?

Best Regards,

Kenji

over 2 years ago

0 Evan Mayhew over 2 years ago

TI__Mastermind 25378 points

Hi Kenji,

I'm not familiar with external lightning surge protection, can you clarify what this looks like? A block diagram would be useful for me to understand.

Relative to surge protection, I have only seen ESD diodes used on the MDI lines.

Thank you,

Evan

0 Kenji Ohno1 over 2 years ago in reply to Evan Mayhew

Genius 5095 points

Hi Evan,

Thank you.

Yes, I have also introduced ESD and TVS diodes on the board.

I know of cases where surge absorber products are included as a countermeasure, perhaps as a device to be put between the board and the cable.

I would like you to share some proven surge absorber products that are actually used in SPE.

Do you share such information within your team?

Best Regards,

Kenji

0 Evan Mayhew over 2 years ago in reply to Kenji Ohno1

TI__Mastermind 25378 points

Hi Kenji,

We don't have any data for an external surge absorber used on the MDI, please contact the TVS/ESD team as they may be in a better position to help you with this.

Thank you,

Evan

Interface

Interface forum

DP83TD510E: Recommended surge protection devices