DS90UB941AS-Q1: SSC default

Brian Li

Genius 13850 points

Part Number: DS90UB941AS-Q1

Hi team,

My customer is using our DS90UB941AS-Q1.

And they find our device can support SSC.

Could you please kindly help check if the device default have the SSC enable or disable?

And if customer want to change this status, which register need to change?

Thanks,

Brian

over 1 year ago

0 Ikram Haque over 1 year ago

TI__Mastermind 23110 points

Hi Brian,

I am checking the SSC functions of the 941AS and I will get back to you by Thursday.

Best regards,
Ikram

0 Brian Li over 1 year ago in reply to Ikram Haque

TI__Genius 13850 points

Thanks Ikram,

Looking forward to your reply.

Best Regards,

Brian

+1 Ikram Haque over 1 year ago in reply to Brian Li

TI__Mastermind 23110 points

Hi Brian,

The 941AS datasheet " Input SSC Tolerance" section just describes the SSC supported by the device. There is no register to enable or disable this; it just describes the SSC requirement that the system source must meet.

Note that this device does not support spread spectrum clock generation though; but we have other devices that can support SSCG over the FPD-link channel.

Best regards,
Ikram

Interface

Interface forum

DS90UB941AS-Q1: SSC default