USB Micro-B ID Pin handling

vandit mehta

Prodigy 60 points

Hi Support,

Can we switch between host mode and device mode in USB Micro-B alternately by hardware?

We want same device (connected at USB Port), by handling ID Pin, to work as host and device.

Any IC or circuit related to the same available?

Regards,

Vandit

over 1 year ago

0 Rohit Parashar over 1 year ago

TI__Intellectual 2865 points

Hello Vandit,

Please allow me to check if the thread is correctly assigned.
To the best of my knowledge, my group does not have any IC for USB Micro-B.

Thanks.

0 Adam Mc Gaffin over 1 year ago in reply to Rohit Parashar

TI__Mastermind 30000 points

vandit mehta said:
Can we switch between host mode and device mode in USB Micro-B alternately by hardware?

This functionality is not possible on a USB Micro B. This is only possible with USB-C

We have a brand new device, the TPS25751, that has the ability to swap between power sink/source and DFP/UFP depending on how you configure it.

Interface

Interface forum

USB Micro-B ID Pin handling